Mounting Better than Cage Nuts
Mounting 19″ equipment in a network rack has never been easier before – with the /dev/mount, our innovative, high-quality cage nut alternative. When are holding the equipment securely in place before the hex nuts are even fastened, making hardware mounting a faster, easier, and more secure task. Our /dev/mount is safer to use than conventional M5 or M6 cage nuts. To fasten hardware fewer pieces are needed, this saves a lot of time and nerves.
Saving hundreds of man-hours with our experts and online systems for parts supply.
Toolless and easily installed
When mounting the /dev/mount, you must pass it through the 19″ rail from behind, guide the small lug through the middle hole, and hook it there. Finally, the still-open leg is pressed shut and holds the /dev/mount securely in place.
Easier handling for faster installation
Network Connections Group looks to make mounting hardware even easier and faster the /dev/mount comes with long reversible hex nuts, that can be used from both sides no matter how you hold them. Sweaty hands and tiny screws in uncomfortable positions are a terrible combination – this takes up a lot of expensive time and can even lead to back-related injuries. The easier handling of our cage nut alternative speeds up the process of mounting 19″ equipment and is time and cost-saving.
No more hurting fingertips
Save your fingers M5 and M6 cage nuts have sharp edges and can be quite dangerous. Every technician knows the pain. The /dev/mount is easily installed and doesn’t require any tools. It is designed to be handled much safer. Our cage nut alternative can be softly and comfortably mounted onto the 19″ rail of the network rack.
Better than Cage Nuts
Cage Nuts are all over the server racks, and it’s now time to move on from the OLD-type cage nuts and save your fingers and time, how many times have we shed blood trying to pull the cage nuts in and out? Now it’s much better and the time and finger bleeding is over with the new Cage nuts.
The /dev/mount is significantly better than a conventional cage nut in terms of safety, simplicity, and speed. Due to the sophisticated snap-in function, the /dev/mount is mounted in seconds. The /dev/mount is compatible with 19-inch rails with square holes that allow standard server rails to be installed. The /dev/mount consists of only one piece, making hardware installation much faster.
The /dev/mount is compatible with 19″ rails with square punched holes that are capable of installing standard server rails.
They are just one piece and require no tools, and are easily installed. Setting up a network rack can be an exhausting and sweaty job. Sweaty hands and tiny screws in uncomfortable positions are a bad combination – taking up valuable time and could even lead to back-related injuries. The easier handling of our cage nut alternative speeds up the process of mounting 19″ equipment, saving you time and cost. Simplify device mounting. Save time and nerves! Our cage nut alternative can be softly and comfortably mounted onto the 19″ rail of the network rack. With our /dev/mounts you can easily fasten hardware or just put the /dev/mount through the square punched holes with the bolts facing you. Place the switch in the rack and put it on the bolts. Now take the hex nuts and fasten them by hand – no tools needed.
Two are required for each unit.
We support labeling solutions and projects for all wiring products and our network cabling technicians will help you with your labeling installation and network cabling systems. We have installed thousands of structured wiring projects for cabling installers from basic cable management to the most complex structured data cabling down to the last few patch panel labels and wrap-around labels, with our FREE software www.printmycablelabels.com Over the last 20 years we have used and watched cabling engineers number and label all types of data cable equipment, we have worked in this field and used many wraps around cable labels on millions of miles (km) of data cables and computer cord labels.